| ONLY 1 TUBE | 1/2 TUBES |
ONLY 1 TUBE |
 |
 |
 |
|
Low Speed |
Low/High Speed |
Low Speed |
|
|
|
|
SPECIFICATIONS
|
1 Tube / 2 Tubes / 3 Tubes |
|||||
 |
 |
 |
 |
 |
|
| CONSTANT POTENTIAL POWER RATINGS | 32 kW | 40 kW | 50 kW | 64 kW | 80 kW |
| RADIOGRAPHIC kVp RANGE IN 1 kVp STEPS | 40 - 125/150 | 40 - 150 | |||
| mA RANGE |
10 - 400 |
10 - 500 | 10 - 640 | 10 - 640 | 10 - 800 |
| EXPOSURE TIME RANGE | 0.001 - 10 seconds | ||||
| mAs RANGE (*) 640 mAs or more - on request |
0.1 - 500 mAs (*) | ||||
| AUTOMATIC EXPOSURE CONTROL | Optional | ||||
| TOMO | Optional | ||||
| BUCKYS (2 UNITS STANDARD) | Optional up to 4 | ||||
| ANATOMICAL PROGRAMMER | Optional | ||||
| INTEGRATED HIGH SPEED STARTER | Optional | ||||
| FLUOROSCOPIC kVp RANGE IN 1 kVp STEPS | 40 - 120 | |||||||||
| FLUOROSCOPY FIXED PPS VARIABLE PPS (OPTIONAL) |
|
|||||||||
| AUTOMATIC BRIGHTNESS CONTROL | Optional |
| 3/2 POINT OPERATION CONSOLE | 3 P. Standard/2 P.Optional | |
| DIGITAL IMAGE SYSTEM INTERFACE | Optional | |
| LINE VOLTAGE RANGE (VAC) | 230/240/400/ 415/440/480 | 400/415/440/480 |
| LINE PHASES | Single Phase/Three phase | Three phase |
| AUTOMATIC LINE COMPENSATION | ±10% | |
| MINIMUM POWER LINE REQUIREMENTS ACCORDING TO IEC 601-2-7 | ||
Specifications subject to change without notice
SPECIFICATIONS
 |
 |
 |
|
| CONSTANT POTENTIAL POWER RATINGS | 30 kW | 40 kW | 50 kW |
| RADIOGRAPHIC kVp RANGE IN 1 kVp STEPS | 40 - 125/150 | ||
| mA RANGE |
10 - 320 |
10 - 400 |
10 - 500 |
| EXPOSURE TIME RANGE | 0.001 - 10 seconds | ||
| mAs RANGE | 0.1 - 500 mAs (*) | ||
| AUTOMATIC EXPOSURE CONTROL | Optional | ||
| TOMO | Optional | ||
| BUCKYS (2 UNITS STANDARD) | Optional up to 4 | ||
| ANATOMICAL PROGRAMMER | Optional | ||
 ¹ |
Optional | ||
| FLUOROSCOPIC kVp RANGE IN 1 kVp STEPS | 40 - 120 | |||||||||
| FLUOROSCOPY FIXED PPS VARIABLE PPS (OPTIONAL) |
|
|||||||||
| AUTOMATIC BRIGHTNESS CONTROL | Optional |
| 3/2 POINT OPERATION CONSOLE | 3 P. Standard/2 P.Optional | |
| LINE VOLTAGE RANGE (VAC) | 110-230 VAC | |
| LINE PHASE | Single Phase | |
| AUTOMATIC LINE COMPENSATION | ±15% | |
| STORAGE CAPACITY | 52,500 mAs @ 100 kV | 127,500 mAs @ 100 kV |
| MINIMUM POWER REQUIREMENTS ACCORDING TO IEC 601-2-7 = 2,200 W | ||
| ¹ UNINTERRUMPIBLE POWER SUPPLY OPTION - (LINE POWER REQUIREMENT = 500W (X-RAY TUBE + GENERATOR) | ||
Specifications subject to change without notice