PLASTI-LABWARE PRODUCTS

1)  BEAKERS

BEAKERS MOULDED IN POLYPROPYLENE HAVE EXCELLENT CLARITY & VERY GOOD CHEMICAL RESISTANCE. THESE AUTOCLAVABLE BEAKERS HAVE PROMINENTLY RAISED GRADUATIONS ON THE OUTER SURFACE . POURING A SOLUTION BECOMES VERY CONVENIENT OF ITS TAPERED SPOUT.

MATERIAL: POLYPROPYLENE

TOP

2) BEAKERS (EURO DESIGN)

MATERIAL :POLYPROPYLENE

MATERIAL: TPX

TOP

3) BURETTE

THIS BURETTE HAS A TRANSPARENT ACRYLIC BODY & A LEAK PROOF STOPCOCK MADE FITTED WITH A SELF LUBRICATING PTFE PLUG. EACH BURETTE IS INDIVIDUALLY CALIBRATED TO GIVE MAXIMUM ACCURACY. ACRYLIC BODY IS UNAFFECTED BY DILUTE MINERAL ACIDS & BASES EXPECT HYDROFLUORIC ACID & AMMONIUM HYDROXIDE. THE PH RANGE OF 1-14 IS DEAL & CAN BE USED UP TO 5% WT/WT OF ACIDS /30% BASES.

MATERIAL: POLYMETHYL METBACRYLATE / TPX

4) PIPETTE PUMP

PRESENTS A FAST RELEASE PIPETTING DEVICE FOR PRECISE PIPETTING & ZIP QUICK EMPTYING. THE KNURLED THUMBWHEEL CAN BE ROTATED TO DRAW UP OR DISPENSE LIQUIDS WHILE THE RELEASER MAY BE PUSHED IN FOR ZIP-QUICK EMPTYING. THE MOULDED CHUCK HAS A SILICON RUBBER CULLET INSIDE TO HOLD VARIOUS PIPETTES OF STANDARD SIZES. IT RESISTS ACIDS & ALKALIS & CAN BE EASILY DISASSEMBLED FOR THOROUGH CLEANING.

TOP

5) DROPPING BOTTLES

BLOWN IN LOW DENSITY POLYETHYLENE  DROPPING BOTTLES DISPENSE SMALL UNIFORM DROPS OF LIQUIDS WHEN PRESSED LIGHTLY

MATERIAL: LOW DENSITY POLYETHYLENE

 TOP

6) REAGENT BOTTLES (NARROW MOUTH)

THESE NARROW MOUTH REAGENT BOTTLES ARE AVAILABLE IN POLYPROPYLENE AS WELL AS POLYETHYLENE. THE PP BOTTLES ARE RIGID, TRANSLUCENT & HAVE EXCELLENT CONTACT CLARITY. THESE BOTTLES CAN BE AUTOCLAVE FILLED AS  WELL AS EMPTY. ON THE OTHER HAND THE POLYETHYLENE BOTTLES TOO HAVE EXCELLENT STRENGTH & ARE UNBREAKABLE. THE POLYETHYLENE CAP HAS A BUILT  IN SEAL RING TO MAKE THESE BOTTLES LEAK PROOF.

 TOP

7) REAGENT BOTTLES (WIDE MOUTH)

THESE WIDE MOUTH REAGENT BOTTLES ARE AVAILABLE IN POLYPROYLENE AS WELL AS POLTETHYLENE. THE PP BOTTLES ARE RIGID , TRANSLUCENT & HAVE EXCELLENT CONTACT  CLARITY. THESE BOTTLES CAN BE AUTOCLAVED FILLED  AS WELL AS  EMPTY. ON THE OTHER HAND, THE POLYPROPYLENE CAP HAS A BUILT IN SEAL RING TO MAKE THESE BOTTLES LEAK PROOF.

MATERIAL: LOW DENSITY POLYETHYLENE

TOP

8) ASPIRATOR BOTTLES

ASPIRATOR BOTTLES ARE MADE OF POLYPROPYLENE & MUCH LIGHTER THAN GLASS. THESE ARE AUTOCLAVABLE, DURABLE & DEPENDABLE. THE LEAK PROOF SPIGOT SCREWED TO THE BOTTLE BODY REQUIRES ONLY A HALF TURN TO OPEN OR CLOSE. THESE BOTTLES ARE USED FOR STORING OR DISPENSING DISTILLED WATER &  OTHER LABORATORY SOLUTIONS. THREADS SHOULD BE TOTALLY DISENGAGED BEFORE AUTOCLAVING.

TOP

9) WASH BOTTLE

Wash bottle are made of low density polyethylene which gives these bottle a translucent & unbreakable character. Solution can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.

Material : low density polyethylene  

10) WASH BOTTLE (NEW TYPE)

THESE BOTTLE ARE ALSO MADE OF LOW DENSITY POLYETHYLENE AND ARE THEREFORE TRANSLUCENT & UNBREAKABLE .THE DISTINGUISHING FEATURE THAT THESE BOTTLE CONTAIN IS THE BUILT IN DELIVERY TUBE MAKING IT A ONE-PIECE WASH BOTTLE. THESE BOTTLE ARE GRADUATED ON THE OUTER SURFACE TO GIVE AN APPROXIMATE IDEA ABOUT THE VOLUME OF SOLUTION FILLED OR DISPENSED.

MATERIAL : LOW DENSITY POLYETHELENE

TOP

11) CONICAL FLASK

MADE OF POLYPROPYLENE ,THESE CONE SHAPED FLASKS ARE RIGID , TRANSLUCENT & AUTOCLAVABLE .THE SCREW CAP KEEPS THE CONTENTS OF THE FLASK CONTAMINATION FREE AND MAKES THE FLASK LEAK PROOF. THREADS SHOULD BE DISENGAGED BEFORE AUTOCLAVING.

MATERIAL POLYPROPYLENE

TOP

12) FISHER CLAMPS 

THESE CLAMPS ARE MOULDED IN POLYPROPYLENE MAKING IT COMPLETELY CORROSION-PROOF .THE  SPRING LOADED JACK IN THE MIDDLE PROVIDES A VICE LIKE GRIP TO THE BURETTE AND PREVENTS IT FROM SLIPPING. TWO TAPERED WEDGES ARE PROVIDED TO ENSURE FIRM GRIP ON RODS HAVING DIA ½” OR 3/8”

MATERIAL POLYPROPYLENE  

TOP

13)FUNNEL HOLDER

MADE OF POLYPROPYLENE THESE CORROSION FREE FUNNEL  HOLDER CAN HOLD FUNNELS WITH DIA 3” TO 6” .THE EXTRA PLATE PROVIDED CAN BE PLACED TO HOLD FUNNEL BEARING DIA 1”TO3”.TWO TAPERED WEDGES ARE PROVIDED TO ENSURE FIRM GRIP ON RODS HAVING DIA ½” OR 3/8”.

MATERIAL : POLYPROPYLENE

 14) SEPERATORY FUNNEL HOLDER

THIS NON-CORROSIVE SEPERATORY FUNNEL HOLDER ,MOLDED IN POLYPROPYLENE, HAS A FRONT OPENING WHICH PROVIDES CLEAR VIEW OF THE SOLUTION AND ALLOWS UNOBSTRUCTED PLACEMENT OF SEPARATING FUNNEL. TWO TAPERED WEDGES ARE PROVIDED TO ENSURE FIRM FIRM GRIP ON RODS HAVING DIA ½” OR 3/8”

MATERIAL : POLYPROPYLENE

TOP

15) FLASK STAND

MOULDED IN POLYPROPYLENE, THIS FLASK STAND GIVES A STAIR-LIKE TOP VIEW. EVERY STEP PROVIDES EXCELLENT SUPPORT TO THE ROUND BOTTOM FLASK AT EVERY POINT OF CONTACT .THIS FLASK STAND CAN HOLD ROUND BOTTOM FLASKS UP TO 10LTR CAPACITY .THIS STACKABLE FLASK STAND CAN ALSO BE STEAM AUTOCLAVED .

TOP

16) ANIMAL CAGE

AVAILABLE IN TWO DIFFERENT SIZES, THESE CAGES PROVIDE EXCELLENT SHELTER FOR DIFFERENT ANIMAL SPECIES IN THE LABORATORY .THE METALLIC TOP PROVIDES PROPER VENTILATION AND HAS PROVISION FOR FEEDING THE SPECIES.

MATERIAL  : POLYPROPYLENE

TOP

17) RETORT STAND

THESE NO.N –CORROSIVE ,MOULDED RETORT STANDS PROVIDE  EXCELLENT REPLACEMENT FOR THE METAL ONES. EVEN THE METALLIC ROD HAS A POLYPROPYLENE COVERING MAKING IT NON-CORROSIVE .THE ROD MEASURING 12.5MM X 750MM CAN BE SCREWED INTO THE HEAVY BASE GIVING WAY TO A PERFECTLY STABLE RETORT STAND

MATERIAL  : POLYPROPYLENE/ POLYSTYRENE

 TOP

18) DESICCATORS (VACCUM)

DESICCATORS ARE MADE OF POLYPROPYLENE AND POLYCARBONATE. THESE AUTOCLAVABLE VACCUM DESICCATORS CAN HOLD VACCUM UP TO 740MM OF HG FOR 24HRS.WITHOUT ANY GREASING THE TOP DOME ,MOULDED IN RIGID AND TRANSPARENT POLYCARBONATE ,GIVES A CRYSTAL CLEAR VIEW OF THE HANDLING DESICCANT PLACED INSIDE .THE KNURLED KNOB ON THE TOP PROVIDES EASY HANDLING OF THE DOME .THE LOWER PART  IS MADE OF POLYPROPYLENE .N INTERNAL GROOVE IS PROVIDED ON THE FLANGE TO HOLD A SILICON RUBBER O-RING .THE POLYPROPYLENE STOPCOCK IS FITTED WITH A SELF LUBRICATING PTFE PLUG .THIS PLUG WORKS THREE WAY  i.e., VACCUM CREATION ,SHUTTING OFF & VACCUM RELEASING.

MATERIAL  : POLYPROPYLENE/ POLYSTYRENE

 18 (a) : DESICCATORS (Plain)

PLAIN DESICCATORS ARE PHYSICALLY THE SAME AS VACCUM DESICCATORS. ONLY DIFFERENCE IS THE ABSENCE  OF STOPCOCK. GREASE SHOULD BE APPLIED ON THE FLANGES TO MAKE IT AIR TIGHT 

MATERIAL  : POLYPROPYLENE/ POLYCARBONATE

BOTH  VACCUM & PLAIN DESICCATORS ARE PROVIDED WITH A THICK PERFORATED POLYPROPYLENE DISC WITH A BIG HOLE IN THE CENTRE FOR EASY LIFTING .THE TINY HOLES IN THE DISC PROVIDE AIR  THROUGH & SUPPORT TO THE DISHES. HOWEVER PORCELAIN DISCS ARE ADVISABLE IN CASE OF INCANDESCENT CRUCIBLES.

TOP

19) STOP COCKS

THESE POLYPROPYLENE STOPCOCK ARE FITTED WITH A PTFE PLUG & HAVE SERRATED TABULATION THAT ACCEPT FROM 6MM TO 10MM TUBING. THESE STOPCOCKS ARE ABSOLUTELY LEAK PROOF AND ARE AVAILABLE IN TWO DIFFERENT OPTIONS THAT IS 2 WAY & 3 WAY.

 MATERIAL  : POLYPROPYLENE/ PTFC

TOP

20) KIPP'S APPARATUS

KIPP'S APPARATUS MADE OF POLYETHYLENE HAS THREE MAIN PORTIONS. THE TOP PORTION IS FITTED WITH A THISTLE FUNNEL AND A BULB STRUCTURE THROUGH WHICH DILUTE ACID CAN BE POURED WHICH REACT WITH A METAL SULPHIDE IN THE BASE OF THE APPARATUS .H2S GAS THEN EVOLVED COLLECT IN THE MIDDLE DOME FROM WHERE IT CAN BE RELEASED THROUGH A LEAK PROOF STOPCOCK FITTED WITH A SELF LUBRICATING PTFE PLUG.5THE BASE IS PROVIDED WITH A RESIDUAL OUTLET FITTED WITH A CAP FOR EASY CLEANING

MATERIAL  : HIGH DENSITY POLYETHYLENE 

TOP

21) FUNNELS-LONG STEM

THESE LONG STEM FUNNEL HAVE SMOOTH WALLS, 60⁰ CONE ANGLE AND EXTERNAL RIBS TOM PREVENT AIR LOCK. MOULDED IN POLYPROPYLENE, THESE CLEAR FUNNEL CAN ALSO BE STEAM AUTOCLAVED.

MATERIAL  : POLYPROPYLENE

TOP

21 (A) BUCHNER FUNNEL

MOULDED POLYPROPYLENE, THESE TWO PIECE FUNNELS ARE LIGHT WEIGHT EASY TO CLEAN & AUTOCLAVABLE. THE TOP PORTION CAN BE SNAP FITTED WITH THE LOWER ONE FORMING A VACCUM SEAL WHICH DOES NO.T REQUIRE GREASING .THE BASE OF THE TOP PORTION HAS A PERFORATED FILTER PLATE.

MATERIAL  : POLYPROPYLENE

22. PETRI DISH

THESE POLYPROPYLENE PETRI DISH ARE CLEAR ,UNBREAKABLE & AUTOCLAVABLE.

 MATERIAL  : POLYPROPYLENE

NEWLY ADDED PS PETRI DISH WITH FITTING PROVES EXCELLENT FOR CULTURE EXP.

MATERIAL  : POLYPROPYLENE

TOP

23. AUTOMATIC MODEL SET

THESE SETS CONSISTS OF MOULDED BALLS OF DIFFERENT COLORS AND SIZES ALONG WITH CONNECTING LUGS OF DIFFERENT SIZE. THESE SETS ARE VERY HELPFUL IN MODELING DIFFERENT ORGANIC & INORGANIC COMPOUNDS.

SENIOR SET : THESE SETS CONSIST OF150 LUGS & 370BALLS OF PRESCRIBE COLORS & SIZES PACKED IN A MOULDED BOX HAVING SEPARATE SPACE FOR EVERY PARTICULAR COLOR & SIZE OF ALL BALLS

JUNIOR SETS : THIS SETS CONSIST OF 30 LUGS & 75 BALLS OF

MATERIAL  : POLYSTYRENE

TOP

24) CRYSTAL MODEL SET

THESE CRYSTAL MODEL SET CONTAIN DIFFERENT COLOR JACK (RED BLACK & WHITE )& CONNECTOR (LONG & SHORT) IN PRESCRIBE NUMBER TO BE JOINED TOGETHER IN AN ILLUSTRATED WAY TO FORM STRUCTURE LIKE DIAMOND ,GRAPHITE & SODIUM CHLORIDE.

 MATERIAL  : POLYPROPYLENE

TOP

25) COPLIN JAR

COPLIN JAR MADE OF POLYPROPYLENE CAN HOLD 10SLIDE OF THE SIZE 1”X3” BACK TO BACK. THE INTERIOR OF THE COPLIN JAR IS GROOVED IN A WAY TO HOLD SLIDE IN ERECT POSITION. DOME AND SHALLOW THREAD SCREW CAP PROVIDES PROTECTION TO HE SLIDES

 MATERIAL  : POLYPROPYLENE

TOP

26) SLIDE MAILER

SLIDE MAILER PRESENT THE BEST OPTION TO CARRY PREPARED SLIDES FROM ONE PLACE TO ANOTHER .MOULDED IN POLYPROPYLENE ,THESE SLIDE MAILER ARE AVAILABLE IN TWO SIZE I.E. 2 SLIDES & 5 SLIDES

MATERIAL  : POLYPROPYLENE

 27) SLIDE BOX

THESE SLIDE BOX ARE DURABLE COMPACT AND PROVIDE ALMOST PROTECTION TO 1”X3” SLIDES .HEAVY WALL WILL NOT WRAP, SPLINTER OR CRACK. BOXES AREV UN AFFECTED BY HUMIDITY & THOROUGHLY INSECT PROOF .BASE OF THE

MATERIAL  : POLYPROPYLENE

TOP

28) MICRO CENTRIFUGE TUBE

THESE MICRO CENTRIFUGE TUBE MOULDED IN POLYPROPYLENE ,HAVE BUILT IN PLUG IN WHICH SNAP FIT AND MAKE THESE TUBES LEAK PROOF .THESE TUBES CAN WITHSTAND HIGH FORCES OF AN ULTRA CENTRIFUGE AND CAN BE USED FOR TRANSMITTING SAMPLE FOR MICRO ANALYSIS

MATERIAL  : POLYPROPYLENE

TOP

29) FLOAT RACK

THESE FLOAT RACK MOULDED IN POLYPROPYLENE IS QUITE COMPACT AUTOCLAVABLE AND CAN HOLD 16 MICRO CENTRIFUGE TUBE STUBES FOR INCUBATION IN WATER BATH. EASY TO LOAD ,THESE ARE ESSENTIAL IN MICROBIOLOGY & IMMUNOLOGY LABS .THE SURFACE OF THE RACK HAS RAISED ALPHA –NUMERIC INDEX FOR EASY IDENTIFICATION AND HAS A CENTRAL ROD HANDLE FOR CONVENIENT LIFTING.

 MATERIAL  : POLYPROPYLENE

TOP

30) MCT TWIN RACK

POLY LAB PROVIDES THIS TWIN RACK FOR BOTH 0.5ML  1.5ML.MICRO CENTRIFUGE TUBES. EACH SIDE HAS 108 HOLES FOR 0.5 & 1.5ML .MCTS RESPECTIVELY .THE TRANSPORT TOP PROVIDES AN EXCELLENT VIEW AS WELL AS A PROTECTION COVER FOR THE TUBES STORED .EACH FACE OF THE BASE A UNIQUE ALPHA –NUMERIC INDEX FOR EASY INDENTIFICATION OF THE TUBE.

MATERIAL  : POLYPROPYLENE

TOP

31) PCR TUBE RACK

THIS RACK AS THE NAME SUGGEST IS USED FOR KEEPING PCR TUBES. TOP & BASE OF THIS RACK ARE  MADE OF TOUGH & TRANSPARENT POLYCARBONATE WHILE THE MIDDLE PORTION IS MADE OF POLYPROPYLENE .THE TUBE HOLDING SPACE ARE UNIFORMLY PLACED SO AS TO FACILITATE THE USED OF MULTI PIPETTE. A NO OF RACKS CAN BE STACKED TOGETHER TO SAVE SHELF SPACE.

MATERIAL  : POLYCARBONATE/POLYPROPYLENE

TOP

32)MCT BOX

MCT BOXES ARE MOULDED IN POLYCARBONATE AND ARE STRONG AS WELL AS AUTOCLAVABLE. ONE SIZE CAN HOLD 100MCT OF 0.5ML .THESE BOXES ARE DESIGN TO WORK AT TEMPERATURE RANGING FROM –190C TO+ 121C .THE TRANSPARENT COVER PROVIDES A GOOD VIEW OF THE  CONTENT INSIDE & IS NUMBERED FOR BETTER INVENTORY CONTROL.

MATERIAL  : POLYCARBONATE/POLYPROPYLENE

TOP

33. CENTRIFUGE TUBE CONICAL BOTTOM

CENTRIFUGE TUBES WITH CONICAL BOTTOM ARE AVAILABLE IN TWO SIZE THAT SIZE : 15ML & 50ML .MOULDED IN POLYPROPYLENE THESE TUBES ARE CLEAR ,STRONG & SAFE .THE AUTOCLAVABLE TUBES ARE PROVIDED WITH PRINTED GRADUATION ON THE OUTER SURFACE .THE BUILT IN SEAL IN THE RING IN THE CAP MAKE THESE TUBE LEAK PROOF. THESE TUBES CAN WITHSTAND FORCES UP TO 7500XGX12000XG FOR 15ML & 50ML TUBES RESPECTIVELY .THESE TUBES ARE AVAILABLE STERILIZED AS WELL AS NO.N STERILIZED .

MATERIAL  : POLYCARBONATE/POLYPROPYLENE

34) CENTRIFUGE TUBE ROUND BOTTOM

CENTRIFUGE TUBE ROUND BOTTOM ARE MOULDED IN POLYPROPYLENE & POLYCARBONATE .THESE TUBES ARE EXCELLENT CLARITY & STRONG ENOUGH TO BE USED UP TO50000KG.THESE TUBES CAN BE AUTOCLAVE. HOWEVER REPEATED AUTOCLAVING IN PC TUBES REDUCES THEIR MECHANICAL. 

MATERIAL  : POLYCARBONATE/POLYPROPYLENE

TOP

35)OAK RIDGE CENTRIFUGE TUBES

OAK RIDGE CENTRIFUGE TUBES MADE OF POLYPROPYLENE, HAVE EXCELLENT CONTACT CLARITY AND CAN BE USED UP TO 50000 xG . THE SCREW CAP FITTED WITH SILICON O RING MAKING IT TOTALLY LEAK PROOF.  THESE TUBES SHOULD NOT BE USED BELOW 4^OC

 MATERIAL  : POLYPROPYLENE

TOP

36) SAMPLE CONTAINER (SCREW CAP)

SAMPLE CONTAINER ARE MADE OF POLYPROPYLENE .THESE THIN WALL DISPOSABLE CONTAINER ARE EASILY SCREW CAPED WITH LESS THAN 1/4^TH OF A ROTATION .AS ONE SCREW CAPS CONTAINERS ,THE TOP OF ITS SET IN A DOMED RING IN THE CAP MAKING IT COMPLETELY LEAK PROOF .THIS IS PERHAPS THE IDEAL MOST OPTION AVAILABLE FOR CARRYING SAMPLES FROM ONE PLACE TO ANOTHER SAFE & SOUND.

MATERIAL  : POLYPROPYLENE

TOP

37) URINE CONTAINER

THESE CONTAINER CAN BE USED FOR COLLECTING A WIDE RANGE OF SAMPLE OF SPUTUM, URINE ETC. MOULDED IN POLYPROPYLENE THESE CONTAINER HAVE EXCELLENT CONTACT CLARITY AND THE CAP HAS BUILT IN SEAL THAT MAKE IT COMPLETELY LEAK PROOF.

MATERIAL  : POLYPROPYLENE

 TOP

38) STOOL CONTAINER

THESE CONTAINER AS THE NAME SUGGEST ,ARE USED FOR COLLECTING STOOL SAMPLE. THE CAP IS PROVIDED WITH A SPOON LIKE STRUCTURE THAT PROVES HELPFUL INJECTING SAMPLE.

 MATERIAL  : POLYPROPYLENE

TOP

39) RIA VIAL

THESE POLYPROPYLENE/POLYSTYRENE TUBES ARE GENERALLY USED IN RIA, COAGULATION & BACTERIOLOGY. THE POLYPROPYLENE TUBES ARE CLEAR AND CAN WITHSTAND 3000 RCF: THE PP TUBES CAN ACCEPT COMMON ACIDS, ALKALIS & SOLVENT AT ROOM TEMPERATURE WHILE THE PS TUBES CAN ACCEPT MILD BASES, WEAK ACIDS BUT NOT ORGANIC SOLVENT.

MATERIAL  : POLYPROPYLENE

TOP

40) RIA VIAL WITH SCREW CAP

THESE POLYPROPYLENE VIALS ARE UNIQUE BECAUSE CAP FITTED WITH AN O-RING CAN BE SCREWED IN TO THE VIAL MAKING IT A LEAK PROOF VIAL WHICH CAN BE USED IN RIA COAGULATION & BACTERIOLOGY ETC.

MATERIAL  : POLYPROPYLENE

TOP

41) TEST TUBE CAP

THESE TRANSPARENT POLYPROPYLENE CAP FOR TEST TUBES PROVES TO BE AN EXCELLENT PROTECTION TO THE TUBES. THE GROOVES INSIDE THE CAP TIGHTEN THE FITTING ON THE TUBE WHILE THE OUTER GROOVES WOULD HOLD IDENTIFICATION LABELS. THE BUILT IN RING WOULD SET IN THE TUBE MAKING THE COMBINATION A LEAK PROOF ONE .

MATERIAL  : POLYPROPYLENE

TOP

42) STORAGE VIAL

AS THE NAME SUGGEST ,THESE VIALS ARE COMMONLY USED FOR STORAGE OF BIOLOGICAL MATERIAL ,HUMAN & ANIMAL CELLS AT TEMPERATURE AS LOW AS –190DIG C .THE CAP IS PROVIDED WITH A BUILT IN SEAL RING MAKING THE VIAL LEAK PROOF .THE BASE OF THE VIAL HAS LONGITUDINAL GROOVES WHICH GIVE IT A  NON TWISTING CHARACTER WHEN PLACED IN A VIAL RACK.

 MATERIAL  : POLYPROPYLENE

TOP

43) STORAGE VIAL WITH O-RING

THIS NEWLY ADDED VIAL HAS AN O-RING IN THE CAP THAT MAKES IT ABSOLUTELY LEAK PROOF. LIKE OTHER STORAGE VIALS THIS VIAL CAN ALSO BE USED FOR STORAGE PURPOSE AT TEMPERATURE AS LOW AS –190^OC.

MATERIAL  : POLYPROPYLENE

 44)STORAGE VIAL-INTERNAL THREAD

ANOTHER ADDITION TO THE RANGE OF VIALS IS THIS VIAL WHICH HAS INTERNAL THREAD IN IT .THE CAP FITTED WITH AN O-RING SCREW IN TO THE VIAL AND MAKES IT A LEAK PROOF STORAGE VIAL.

MATERIAL  : POLYPROPYLENE

TOP

45) SV10 – SV5

THESE POLYPROPYLENE VIALS ADD TO THE EXISTING  RANGE OF  STORAGE  VIALS. AVAILABLE IN 5ML & 10ML.CAPACITIES THESE VIALS HAVE POLYPROPYLENE CAP WITH BUILT IN A SEAL RING MAKING IT A LEAKPROOF VIAL. JUST LIKE OTHERS STORAGE VIALS THESE VIALS ARE ALSO USED FOR THE STORAGE OF BIOLOGICAL MATERIAL ANIMAL & HUMAN CELL ETC.

 MATERIAL  : POLYPROPYLENE

TOP

46)SCINTILLATION VIAL

THESE UNBREAKABLE VIALS ,MOULDED IN POLYPROPYLENE ARE FITTED WITH LEAK PROOF SCREW CAPS. THESE VIALS CAN BE USED WITH STANDARD COUNTING EQUIPMENT FOR LIQUID SCINTILLATION SYSTEM AND ARE EXCELLENT FOR LOW ACTIVITY COUNT.

MATERIAL  : HIGH DENSITY POLYPROPYLENE

TOP

47)RACK FOR SCINTILLATION VIAL

THESE RACKS FOR FOR SCINTILLATION VIALS MOULDED IN POLYPROPYENE ,ARE AUTOCLAVABLE & CORROSION RESISTANT .THERE IS AN INDIVIDUAL RACK FOR BOTH 8ML & 20ML VIALS. THESE RUGGED & STABLE RACK CAN HOLD SCINTILLATION VIALS FOR CONVENIENT STORAGE, HANDLING & SAMPLE PREPARATIONS

MATERIAL  : POLYPROPYLENE

 TOP

48) CRYO VIAL INTERNAL THREAD

ADDING TO THE EXISTING RANGE OF CRYO VIALS IS THE VIAL WHICH INTERNAL THREAD IN IT .THE CAP FITTED WITH AN O RING SCREWS IN  TO THE VIAL AND MAKES IT A LEEK PROOF CRYO VIAL .THESE VIALS ARE PROVIDED WITH WHITE PROMINENT GRADUATIONS AND LONG MARKING AREA FOR SAMPLE IDENTIFICATION

 MATERIAL PROPEYLENE

 TOP

49) CRYO VIAL

CRYO VIAL ARE NORMALLY USED FOR STORAGE OF BIOLOGICAL MATERIAL ,HUMAN & ANIMAL CELLS AT TEMPERATURES AS LOW AS –190 DIG C .THESE STERILIZED TUBES ARE PROVIDED WITH WHITE, PROMINENT GRADUATION AND A LONG MARKING AREA FOR SAMPLE IDENTIFICATION .THE CAP OF THESE VIAL  IS PROVIDE WITH SEAL RING INSIDE TO MAKE IT COMPLETELY LEAK PROOF .THE LONGITUDINAL GROOVES IN THE BASE GIVE A NON TWISTING FEATURE TO THESE VIALS WHEN PLACED INA CRYO RACK.

 MATERIAL  : POLYPROPYLENE

TOP

50) CRYO CODERS

THESE CODERS AVAILABLE IN DIFFERENT COLOR CAN EASILY FIT IN TO THE CAP OF CRYO VIALS FOR COLOUE INDENTIFICATION OF DIFFERENT SAMPLES.

MATERIAL  : POLYPROPYLENE

TOP

51)CRYO RACK

CRYO LAB IS MOULDED IN POLYCARBONATE MAKING IT TOUGH, DURABLE & AUTOCLAVABLE .THIS HANDY RACK CAN HOLD 50 VIALS AT A TIME. THE UNIQUE FEATURE OF THESE RACK IS THAT VIALS CAN BE UNSCREWED WITHOUT ACTUALLY PICKING UP AS THE VIALS WILL LOCK IN EVERY WELL AND HENCE WILL NOT TWIST. THIS RACK WILL PROVIDED WITH FOUR ANTI SKID RUBBER & EACH WELL IS IDENTIFIED WITH AN ALPHA –NUMERIC –INDEX.

MATERIAL  : POLYPROPYLENE

TOP

52) CRYO BOX (PC)

POLY CRYO BOXES ARE MOULDED IN POLYCARBONATE MAKING IT EXTRA STRONG AND AUTOCLAVABLE .THESE CAN ACCOMMODATE CRYO VIALS OF UP TO 4.5ML .CAPACITY AND DESIGNED TO BE USED AT TEMPERATURE RANGING FROM 190^OC TO +121^OC .THE TRANSPARENT COVER OF THE BOX GIVES A GOOD VIEW OF THE CONTENT INSIDE AND IS NUMBERED FOR BETTER INVENTORY CONTROL.

MATERIAL  : POLYPROPYLENE

  TOP

53) CRYO BOX (PP)

ARE MOULDED IN POLYCARBONATE THE TOP OF THE BOX IS ATTACHED TO THE BOTTOM THROUGH WELL DESIGN BUILT–IN HINGES. THE BOTTOM HAS BUILT-IN SPACES TO HOLD VIALS UP TO 2ML CAPACITY. AVAILABLE IN TWO DIFFERENT SIZES THESE AUTOCLAVABLE BOXES BEAR ALPHA NUMERIC INDEX FOR EASY IDENTIFICATION OF DIFFERENT VIALS PLACED INSIDE.

. MATERIAL  : POLYPROPYLENE

 TOP

54) IMMUNOLOGY PLATES

IMMUNOLOGY PLATES ARE MADE OF OPTICALLY CLEAR .NON TOXIC POLYSTERENE. THESE PLATES WITH 96U  BOTTOM OR FLAT BOTTOM WELLS BEAR ALPHA NUMERIC INDEX .UNIFORM PLACEMENT OF ALL THE WELLS FACILITATE USE OF MULTICHANNEL PIPETTES. THESE PLATES PACKED INDIVIDUALLY ARE AVAILABLE NON-STERILE AS WELL AS RADIATION STERILIZED.

MATERIAL  : POLYPROPYLENE

TOP

55) MICRO TIPS BOX

THESE MICRO TIPS BOX ARE MOULDED IN POLYPROPYLENE AND ARE THERE FORE AUTOCLAVABLE .THE BOX ITSELF IS CLEAR PROVIDING EXCELLENT VIEW OF THE TIPS INSIDE WHILE A TABLE LIKE STRUCTURE IS PROVIDED INSIDE TO HOLD THE TIPS. THE TIPS HOLDING PLACED ARE UNIFORMLY PLACE T O FACILATE THE USE OF MULTICHANNEL PIPETTES .THE COVER IS JOINT TO THE BASE THROUGH BALL CATCHER HINGES AND PROVIDED EXCELLENT PROTECTION TO THE TIPS.

TOP

56) VOLUMETRIC FLASK

VOLUMETRIC FLASK BLOWN IN POLYPROPYLENE ARE STRONG UNBREAKABLE AND HAVE GOOD CONTACT CLARITY. THESE AUTOCLAVABLE FLASK ARE PROVIDED WITH SCREW CAPS TO PREVENT LEAKAGE.

MATERIAL  : POLYPROPYLENE 

TOP

57) PETRI DISH (DISPOSABLE)

THESE PETRI DISH READY TO USED ARE MADE OF OPTICALLY CLEAR .NON TOXIC POLYSTERENE. THESE PETRI DISHES PACKED INDIVIDUALLY IN POLYETHYLENE BAGS ARE STERILIZED BY RADIATION .

MATERIAL  : POLYSTYRENE

 TOP

58) RACK FOR PETRI DISHES

THIS RACKS WITH CLEAR ACRYLIC CONSTRUCTION WITH WHITE POLYCARBONATE POSTS .IT HAS CAPACITY TO HOLD 60 PETRI DISHES OF 90MM SIZED THIS RACK IS VERY USEFUL IN INOCULATION, INCUBATION & STORAGE. VISIBILITY FROM ALL SIDES ENABLE TO CULTURE TO BE SEEN & CHECKED DURING INCUBATION .

MATERIAL  : POLYCARBONATE/ACRYLIC

TOP

59) TEST TUBES STAND

THESE AUTOCLAVABLE TEST TUBES STAND PERHAPS THE MOST COMMONLY USED TEST TUBE STAND IN VARIOUS LABORATORIES FOR VETTER VISIBILITY ,THIS SIX PLACE RACK IS END SUPPORT BY 2 COLOUM THE TOP PLATE HAS TWO HOLES FOR HOLDING 25NML TEST TUBES  FOUR HOLES TO HOLD 16MM TEST TUBES WHERE AS THE BASE HAS CORRESPONDING HEMISPHERICAL WELLS .IT ALSO HAS SIX VERTICAL PINS FOR DRYING TUBES. ANOTHER OPTION AVAILABLE IN THIS SECTION IS TEST TUBE STAND IN WHICH ALL THE

. MATERIAL  : POLYPROPYLENE

 TOP

60) TEST TUBES STAND (ROUND)

HANDY LITTLE SPACE SAVER THESE CIRCULAR TWELVE PLACE POLYPROPYLENE TEST TUBE STAND HAS FOUR 25MM DIA HOLES & EIGHT 19MM DIA HOLES IN JUST TOP PLATE. THE BASE HAS MATCHING HEMISPHERICAL WELLS & 16 VERTICAL PINS FOR DRYING TUBES SURROUNDED BY A THOUGH TO CATCH DRIPPINGS. THESE AUTOCLAVABLE RACK CAN BE EASILY DISASSEMBLE  FOR CLEANING PURPOSE.

MATERIAL  : POLYPROPYLENE

 TOP

61.& 62.)TEST TUBE STAND (3 TIER)

THESE INGENIOUS RACKS WITH A 3-TIER DESIGN PROVIDE CLEAR VIEW OF THE TUBE CONTENTS & CONVENIENT INSERTION & REMOVABLE OF TUBES, THE PC RACK HAS TRANSPARENT UPPER 7 MIDDLE PLATES WHERE AS IN PP RACKS ,EVERY PART IS COLORED & OPAQUE .THESE AUTOCLAVABLE RACKS CAN WITHSTAND SUB FREEZING TEMPERATURES.

MATERIAL  : POLYPROPYLENE

MATERIAL POLYCARBONATE

TOP

63) RACK FOR MICRO CENTRIFUGE TUBE :

MOULDED IN POLYCARBONATE THESE AUTOCLAVABLE RACK IS MADE FOR HOLDING TWENTY FOUR 1.5ML MICRO CENTRIFUGE TUBE. THESE RACK HAS UNIQUE STACKING FEATURE WHICH PREVENT MOVEMENT IN ANY DIRECTION .THE HOLES ARE NUMBERED AND LETTERED FOR EASY IDENTIFICATION.

MATERIAL POLYCARBONATE

TOP

64) TEST TUBE STAND (WIRE PATTERN)

A ECONOMICAL SUBSTITUTE FOR WIRE RACKS, HERE ARE SUBMERSIBLE, AUTOCLAVABLE RACKS WHICH ARE STACKABLE WHEN EMPTY. THESE ARE AVAILABLE IN DIFFERENT COLORS AND ARE MADE OF SPECIAL BLEND OF POLYPROPYLENE THAT MAKE IT SINK IN A WATER BATH AND MAINTAIN THEIR STABILITY EVEN IN AGITATED WATER. THESE SPACE SAVING RACKS CAN BE EASILY DISASSEMBLE FOR CLEANING PURPOSE. THE BASE IS IN THE FORM OF GRD WITH SQUARE OPENING AND HAS FOLD UP SIDES  AND END BARS THAT LOCK IN TO RACK TOPS.

MATERIAL POLYCARBONATE

 TOP

65) TEST TUBE BASKETS

TEST TUBE BASKETS ARE MADE OF POLYPROPYLENE .THESE AUTOCLAVABLE ,UNBREAKABLE AND NON-CORROSIVE BASKETS ARE IDEAL FOR RINSING & DRAINING GLASSWARE. THESE ARE ALSO USEFUL FOR STORAGE OF TEST TUBES DURING STERILIZATION OR INCUBATION.

MATERIAL POLYPROPYLENE

TOP

66) PIPETTE STAND (HORIZONTAL)

THIS DITACHABLE STAND CAN HOLD 12 PIPETTE ,6 ON EACH SIDE .IN A HORIZONTAL POSITION .MOULDED IN POLYPROPYLENE THIS AUTOCLAVABLE STAND HAS TWO SIDES WHICH HAS ATTACHED to each other WITH THREE METALLIC RODS COATED WITH POLYPROPYLENE .THIS STAND CAN BE EASILY DISASSEMBLED FOE SPACE SAVING STORAGE .

MATERIAL POLYPROPYLENE

TOP

67) PIPETTE STAND (Vertical)

THIS IS STABLE NON-CORROSIVE, DETACHABLE STAND WHICH CAN HOLD 28 PIPETTES WITH MAXIMUM DIA 14MM.THE HEAVY BASE MEASURE 225 mm in LENGTH IS SCREWED INTO THE BASE. THE TOP DISCS THAT CAN BE FIXED ON THE ROD HAS HOLES FOR HOLDING PIPETTES WHILE THE LOWER  ONE HAS PILOT HOLES WHERE THE PIPETTE TIPS REST & LIQUID DRAIN DOWN TO THE BASE. THESE DISCS CAN ARROWS PROVIDES ON THE DISCS SHOULD BE KEPT PARALLEL TO ENSURE THAT CORRESPONDING HOLES ARE BEING CENTERED.

MATERIAL POLYPROPYLENE

 TOP

68) PIPETTE STAND (94 PIPETTE ROTARY)

ARE MADE OF POLYPROPYLENE THIS UNIQUE STAND HOLDS A MAXIMUM OF 94 PIPETTES AND ROTATES ON A CENTRAL VERTICAL AXIS FOR CONVENIENT SELECTION OF ANY PARTICULAR PIPETTE .THE LOWER ROTATING DISCS HAS FOUR CONCENTRIC THROUGH WITH TAPERED SIDES .AND OPEN BOTTOM WHICH CRADLE THE PIPETTE TIPS PROTECTIVELY AND PERMIT WATER DROPS TO RUN OFF .THE UPPER DISC HAS A GRID PATTERN B CONCENTRIC WITH THE BOTTOM DISC AND KEEPS THE PIPETTE VERTICAL .LIQUID DRAINING OF THE PIPETTE ARE RETAIN ON THE TOP OF THE STATIONARY BASE BY THE OUTER RING .THIS STAND CAN BE EASILY DISASSEMBLED & REASSEMBLED.

MATERIAL POLYPROPYLENE

 TOP

69) PIPETTE BOX

ARE MADE OF POLYPROPYLENE THIS PIPETTE BOX IS DESIGN IN SUCH A WAY THAT IT CAN HOLD PIPETTE OF DIFFERENT SIZES .THE TOP OF THE BOX SCREWS ON THE BOTTOM  AND THE HIGHT CAN BE ADJUSTED BY SCREWING OR UNSCREWING THE TOP.

MATERIAL POLYPROPYLENE

TOP

70) REAGENT RESERVOIR

MOULDED IN POLYPROPYLENE THIS AUTOCLAVABLE  REAGENT IS HELPFUL FOR MULTICHANNEL PIPETTE TO BE USED IN TO MICROTITER PLATES.

 MATERIAL POLYPROPYLENE

TOP

71) ICE BUCKET

THIS ICE BUCKET IS MADE OF DURABLE RIGID MATERIAL BEARING EXCELLENT INSULATING PROPERTIES. CONTENTS CAN BE STORED IN IT USING DRY ICE ,LIQUID NITROGEN & ACETONE ETC.

MATERIAL POLYPROPYLENE

TOP

72) STAINING BOX

MOULDED IN POLYPROPYLENE THIS STAINING BO0 HELPS IN STAINING FIXING, DESTAINING & HANDLING FRAGILE ELECTROPHORESIS GELS AND MEMBRANES. BOX AS WELL AS COVER WILL RESIST TEMPERATURE FROM –TO70^OC +70^OC .THE LDPE PLUG PROVIDE LEAK PROOF SEAL AND ALLOWS EASY LIQUID DRAINAGE.

MATERIAL POLYPROPYLENE

 TOP

73) MEASURING CYLINDER

MEASURING CYLINDER MOULDED IN POLYPROPYLENE & TPX ARE SINGLE PIECE CYLINDER. THESE AUTOCLAVABLE CYLINDER  HAVE RAISED PROMINENT GRADUATIONS FOR EASY READING AND HAVE EXCELLENT CONTACT CLARITY. THE BROAD BASE PROVIDES GOOD STABILITY

MATERIAL POLYPROPYLENE

MATERIAL : TPX

TOP

74) MEASURING CYLINDER ( HEXAGONAL )

MEASURING CYLINDER ARE NOW AVAILABLE IN HEXAGONAL BASE ALSO THE HEXAGONAL BASE PROVIDES GOOD STABILITY TO THE CYLINDER WHERE THE TAPERED SPOUT WORKS REALLY WELL WHILE POURING ANY REAGENT.

MATERIAL POLYPROPYLENE

TOP

75) MEASURING CYLINDER PENTAGONAL

ADDING TO RANGE OF ROUND & HEXAGONAL BASE CYLINDER ARE THE PENTAGONAL ONES. NOW WE OFFERS YOU A WIDE RANGE OF CYLINDER WITH DIFFERENT BASES TO CHOOSE FROM. PROMINENTLY RAISED GRADUATION & EXCELLENT CONTACT CLARITY ARE AMONG THE OTHER FEATURE OF THESE CYLINDERS.

MATERIAL POLYPROPYLENE

TOP

76) MEASURING JUGS

THESE HANDY JUGS MOULDED POLYPROPYLENE, ARE CLEAR AUTOCLAVABLE AND HAVE GOOD CHEMICAL RESISTANCE. THESE JUGS ARE PROVIDED WITH A HANDLE FOR EASY & CONVENIENT LIFTING HAVE RAISED GRADUATION FOR EASY READING

MATERIAL POLYPROPYLENE

TOP

77) CONICAL MEASURES

THESE CONICAL MEASURES ARE VERY GOOD FOR MEASURING SMALL QUANTITIES OF REAGENTS. MOULDED IN POLYPROPYLENE ,THESE AUTOCLAVABLE MEASURES HAVE A HEXAGONAL BASE WHICH PROVIDES EXCELLENT STABILITY .THE MEASURES HAVE CLEAR HAVE GOOD CHEMICAL RESISTANCE AND HAVE RAISED GRADUATIONS FOR EASY

MATERIAL POLYPROPYLENE

 TOP

78) SEPERATORY FUNNEL

SEPERATORY FUNNEL MADE OF POLYPROPYLENE GIVING IT EXCELLENT CONTACT CLARITY & STRENGTH THIS PEAR SHAPE AUTOCLAVABLE SEPERATORY FUNNEL HAS LEAK PROOF THREADED SCREW CAP. THE POLYPROPYLENE STOPCOCK FITTED WITH A SELF LUBRICATING PTFE PLUG .IDS PUSH FITTED TO THE STEM OF THE SEPERATORY FUNNEL.

MATERIAL POLYPROPYLENE

TOP

79) SPATULA

MOULDED IN POLYPROPYLENE SPATULA CONSIST OF A SPOON ON ONE SIDE WHILE  THE OTHER END IS A FLAT CONSTRUCTION WITH A KNIFE EDGE .THIS EDGE IS HELPFUL IN BREAKING UP CRYSTALS OF DIFFERENT SALTS WHILE THE SPOON IS USED TO DRAW SALT FROM THE CONTAINERS.

MATERIAL POLYPROPYLENE

TOP

80) PNEUMATIC THROUGH  MADE OF POLYPROPYLENE

ARE AUTOCLAVABLE IN DIFFERENT SIZES. THESE CAN BE USED FOR A WIDE RANGE OF PURPOSE INCLUDING STORAGE, STERILIZING & DRYING LAB WARE ETC.

MATERIAL POLYPROPYLENE

TOP

81) PLANTATION POTS

PLANTATION POTS MOULDED IN POLYPROPYLENE ARE AVAILABLE IN FOUR DIFFERENT SIZES. THESE POTS HAS A DOWNWARD EXTENDED RIM WHICH PROVIDED CONVENIENT LIFTING EVEN IF THE POT IS FILLED .THE  BOTTOM OF THE POT IS PROVIDED WITH HOLES FOR DRAIN PURPOSE

MATERIAL POLYPROPYLENE

TOP

82) LABORATORY TRAY

NEEDLESS TO SAY , LABORATORY TRAY MOULDED IN POLYPROPYLENE IS A MULTIPURPOSE TRAY THAT CAN BE USED FOR STERILIZING DRYING GLASSWARE, PORECELAINWARE & OTHER LABORATORY INSTRUMENT. THESE STEAM AUTOCLAVABLE TRAYS HAVE TAPERED WALLS WHICH PROVE GOOD FOR NESTING

MATERIAL POLYPROPYLENE

TOP

83) UTILITY TRAY

ADDING TO THE ALREADY EXISTING RANGE OF AUTOCLAVABLE LABORATORIES TRAYS IS THE UTILITY TRAY AND AS THE NAME SUGGESTS THIS POLYPROPYLENE  TRAY CAN BE UTILIZED FOR PURPOSE RANGING FROM DRYING GLASSWARE TO STERILIZING AND TO STORE ANY LABORATORY APPARATUS.

MATERIAL POLYPROPYLENE

TOP

84) CARRIER TRAY

THIS AUTOCLAVABLE POLYPROPYLENE TRAY HAS A UNIQUE FEATURE THAT A ITS HANDLE WHICH PROVES REALLY HELPFUL IN CARRYING REAGENTS OR LABORATORY APPARATUS FROM ONE PLACE TO ANOTHER ,SINGLE HANDEDLY

MATERIAL POLYPROPYLENE

TOP

85) MAGENTA BOX

MAGENTA BOX I9S VERY OFTEN USED IN TISSUE CULTURE & AGRICULTURAL RESEARCH EXPERIMENT. MAIN BODY OF THIS BOX IS MADE OF TOUGH & TRANSPARENT POLYCARBONATE  WHICH PROVIDE THE EXCELLENT VIEW OF THE CONTENTS INSIDE SQUARE IN SHAPE GIVING ITSELF A SPACE SAVING FEATURE

 MATERIAL POLYPROPYLENE

TOP

86) STORAGE BOXES

THESE STORAGE BOX MADE POLYPROPYLENE  PROVE TO BE AN EXCELLENT OPTION FOR STORAGE OF DIFFERENT POWDERED REAGENT & OTHER MATERIAL IN THE LABORATORY. SQUARE SHAPE OF THESE BOXES HELP IN SHAVING SELF SPACE. AVAILABLE IBN THREE DIFFERENT SIZES THESE BOXES HAVE POLYPROPYLENE CAPS AUTOCLAVABLE PROVIDED GOOD CHEMICAL RESISTANCE & HEAVY DUTY SERVICE

MATERIAL POLYPROPYLENE

TOP

87) SAMPLE CELL POT

SAMPLE CELL POT AS THE NAME SUGGEST IS USED FOE MAKING SIMPLE CELLS & VOLTMETER ETC. MADE POLYPROPYLENE  THIS POT HAS VERY GOOD CONTACT CLARITY CHEMICAL RÉSISTANCE. BEING  POLYPROPYLENE  THIS POT IS MUCH DURABLE THEN THE ONE USED CONVENTIONALLY

MATERIAL POLYPROPYLENE

TOP

88) LECLANCHE CELL POT

BLOWN IN POLYPROPYLENE .THIS POT IS USED IN MAKING LECLANCHE CELL. THIS POT HAS VERY GOOD CONTACT CLARITY & EXCELLENT CHEMICAL RESISTANCE

MATERIAL POLYPROPYLENE

TOP

89) SAMPLE CONTAINER (PRESS & FIT TYPE)

MADE POLYPROPYLENE  THESE DISPOSABLE CONTAINER ARE USED FOR COLLECTING SAMPLE OF SPUTUM OR URINE ETC. GRADUATED ON THE OUTER SURFACE .THESE CONTAINER HAVE CAP THAT WORK IN A PRESS & FIT MANNER & MAKE THESE CONTAINER LEAK PROOF .THESE DISPOSABLE CONTAINER  ARE E.T.O STERILIZED

MATERIAL POLYPROPYLENE

TOP

90) STIRRER

MADE OF POLYPROPYLENE THESE STIRRER ARE VERY USEFUL FOR STIRRING DIFFERENT SOLUTION IN THE LABORATORY .THESE STIRRER PROVE TO BE TOUGH AND LONG LASTING.

MATERIAL POLYPROPYLENE

TOP